Chicago Pneumatic CPF 300 A-8.6-60 Скачать руководство пользователя страница 34

Страница: 34 / 117

Instruction book

909935AIB

Function

Description

Setpoints

Several setpoints can be modified by tapping this icon.

Control mode

The control mode can be changed by tapping this icon.

• Local control via start/stop buttons

• Remote control via digital input(s)

• LAN control via the network.

When in Remote or LAN control, the start/stop buttons on the controller will not work.

Display language

The display language of the controller can be changed by tapping this icon.

Manual unload (only

on fixed speed units)

When tapped, the machine will go in Manual unload mode until the icon is tapped

again.

Week timer

Week timers can be set by tapping this icon.

Remaining running

time

The Remaining running time can be set and modified by tapping this icon.

Internal SmartBox

The reception quality of the internal antenna can be monitored.

Each bar represents 25% reception strength. If the four bars are filled, the reception

strength is 100%. If only one bar is filled, the reception strength is just 25%.

Auto restart

Auto restart can be activated by tapping this icon.

3.6 Menu screen

Function

This screen is used to display the different menus where settings can be viewed or changed.

Procedure

The Menu screen can be viewed by tapping the Menu button or by swiping right, starting from the

main screen.

Description

Reference

Designation

Function

(1)

Data

The data menu contains the status of the unit, information about the

Inputs, Outputs and Counters. The Auxiliary equipment can also be

viewed through this menu.

Содержание CPF 300 A-8.6-60






















































































































Результаты поиска

Содержание CPF 300 A-8.6-60

Отзывы:

Chicago Pneumatic CPF 300 A-8.6-60, Инструкция, Страница: 34 / 117

Результаты поиска

Содержание CPF 300 A-8.6-60

Отзывы: