Chicago Pneumatic CPF 300 A-8.6-60 Скачать руководство пользователя страница 37

Страница: 37 / 117

Instruction book

909935AIB

If an alarm is active, it can be viewed by tapping the alarm message. To reset an alarm, tap the

reset button (1).

Before remedying, consult the

Safety precautions.

Before resetting a warning or shutdown message, always solve the problem. Frequently

resetting these messages without remedying may damage the unit.

Inputs menu

Tap the Inputs icon to enter the Inputs menu.

This menu shows information about all the inputs.

Outputs menu

Tap the Outputs icon to enter the Outputs menu.

This menu shows information about all the outputs.

Voltage-free outputs may only be used to control or monitor functional systems.

They should NOT be used to control, switch or interrupt safety related circuits.

Check the maximum allowed load on the label.

Stop the unit and switch off the supply before connecting external equipment. Check the

Safety precautions.

Counters menu

Tap the Counters icon to enter the Counters menu.

Содержание CPF 300 A-8.6-60






















































































































Результаты поиска

Содержание CPF 300 A-8.6-60

Отзывы:

Chicago Pneumatic CPF 300 A-8.6-60, Инструкция, Страница: 37 / 117

Результаты поиска

Содержание CPF 300 A-8.6-60

Отзывы: