manualshive.com logo in svg

Chevrolet 2002 Venture, Руководство пользователя

Поделиться
Скачать
Chevrolet 2002 Venture Скачать руководство пользователя страница 329

4-38

Hitches

It’s important to have the correct hitch equipment.
Crosswinds, large trucks going by and rough roads are a
few reasons why you’ll need the right hitch. Here are
some rules to follow:
D The bumpers on your vehicle are not intended for

hitches. Do not attach rental hitches or other
bumper

-

type hitches to them. Use only a

frame

-

mounted hitch that does not attach to 

the bumper.

D If you’ll be pulling a trailer that, when loaded, will

weigh more than 2,000 lbs. (900 kg), be sure to use a
properly mounted, weight

-

carrying hitch and sway

control of the proper size. This equipment is very
important for proper vehicle loading and good
handling when you’re driving.

D Will you have to make any holes in the body of your

vehicle when you install a trailer hitch?

If you do, then be sure to seal the holes later when
you remove the hitch. If you don’t seal them, deadly
carbon monoxide (CO) from your exhaust can get
into your vehicle. See “Carbon Monoxide” in the
Index. Dirt and water can, too.

Safety Chains

You should always attach chains between your vehicle
and your trailer. Cross the safety chains under the tongue
of the trailer to help prevent the tongue from contacting
the road if it becomes separated from the hitch.
Instructions about safety chains may be provided by the
hitch manufacturer or by the trailer manufacturer.
Follow the manufacturer’s recommendation for
attaching safety chains and do not attach them to the
bumper. Always leave just enough slack so you can 
turn with your rig. Never allow safety chains to drag on
the ground.

Trailer Brakes

If your trailer weighs more than 1,000 lbs. (450 kg)
loaded, then it needs its own brakes 

--

 and they must be

adequate. Be sure to read and follow the instructions for
the trailer brakes so you’ll be able to install, adjust and
maintain them properly.

Because you have anti

-

lock brakes, do not try to tap into

your vehicle’s brake system. If you do, both brake
systems won’t work well, or at all.

Содержание 2002 Venture







































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды