manualshive.com logo in svg

Chevrolet 2002 Venture, Руководство пользователя

Поделиться
Скачать
Chevrolet 2002 Venture Скачать руководство пользователя страница 140

2-32

CAUTION:

If you shift the transaxle out of PARK (P) and
accelerate before the power sliding door latches
closed, the door may reverse to the open position.
A child or others could fall out of the vehicle and
be injured. Always make sure the power sliding
door is closed and latched before you drive away.

If an object obstructs the power sliding door while it is
closing, the door will automatically reverse to the open
position, provided it meets sufficient resistance.
Resistance must be as strong as the force of the closing
door, or stronger. The force of the closing door increases
significantly as the door approaches the latched position.

The driver’s side sliding door is designed to open only a
little if the fuel door is open. If this ever happens, don’t
try to force the sliding door. Just close the driver’s side
sliding door. Then when the fuel filler door is closed, the
driver’s side sliding door can be opened normally.

CAUTION:

You or others could be injured if caught in the
path of the sliding door. Make sure the door path
is clear before closing the door.

If you want to open the power sliding door(s) when the
override switch(es) is turned off, pull the inside or
outside handle and let go. The door will open fully.

To open the power sliding door(s) when the override
switch(es) is on, pull the inside or outside handle and
slide the door all the way back.

Содержание 2002 Venture







































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды