Chevrolet 2002 Venture страница 16 Скачать руководство пользователя

Страница: 16 / 486

1-10

The other lever is located on
the rear of the seat.

Lift up either lever and slide the seat forward or
rearward. Release the lever. Push and pull on the seat to
make sure it is locked into place.

Removing the Split Bench Seat

Make sure the seatback is in the upright position.

1. For the second row split bench, with the seatback in

the upright position, unhook the side attachment for
the safety belt. This mini

buckle is located on the

right side of the seat.

2. Push the red center of the

buckle up with a small
pointed object

like a

key or a pen

remove the seat belt,
if needed.

3. Lift the seatback recliner lever or pull the nylon strap

on the back of the seat to fold the seatback forward.

4. Slide the seat all the way back by lifting one of the

adjustment levers and sliding the seat fully rearward.

Содержание 2002 Venture






































































































































































































































































































































































































































































































Результаты поиска

Содержание 2002 Venture

Отзывы:

Похожие инструкции для 2002 Venture

Бренды по названию

Популярные бренды

Chevrolet 2002 Venture, Руководство пользователя

Результаты поиска

Содержание 2002 Venture

Отзывы:

Похожие инструкции для 2002 Venture

Бренды по названию

Популярные бренды