manualshive.com logo in svg

Chevrolet 2002 Venture, Руководство пользователя

Поделиться
Скачать
Chevrolet 2002 Venture Скачать руководство пользователя страница 220

2-112

Here are four things that some owners ask about. All
these things are normal and do not indicate that anything
is wrong with the fuel gage.
D At the gas station, the gas pump shuts off before the

gage reads full.

D It takes a little more (or less) fuel to fill up than the

gage reads. For example, the gage reads half full, but
it took more (or less) than half of the tank’s capacity
to fill it.

D The gage pointer may move while cornering, braking

or speeding up.

D The gage may not indicate empty when the ignition

is turned off.

Message Center

The message center is located in the instrument 
panel cluster. It gives you important safety and
maintenance facts.

Charging System Indicator Message

The charging system 
battery symbol will come
on in the message center
when you turn on the
ignition as a check to 
show you it is working.

It will remain on as long as the engine is not running. It
should go out once the engine is running. If it stays on,
or comes on while you are driving, you may have a
problem with the charging system. It could indicate that
you have problems with a generator drive belt, or
another electrical problem. Have it checked right away.
Driving while this indicator appears in the message
center could drain your battery.

If you must drive a short distance with the message on,
be certain to turn off all your accessories, such as the
radio and air conditioner.

Содержание 2002 Venture







































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды