manualshive.com logo in svg

Chevrolet 2002 Venture, Руководство пользователя

Поделиться
Скачать
Chevrolet 2002 Venture Скачать руководство пользователя страница 170

2-62

Windshield Washer

To wash your windshield, press and hold the windshield
washer paddle. The washers and wipers will operate.
When you release the paddle, the washers will stop, and
the wipers will continue to operate for two cycles, unless
your wipers had already been on. In that case, the wipers
will resume the wiper speed you had selected earlier.

CAUTION:

In freezing weather, don’t use your washer until
the windshield is warmed. Otherwise the washer
fluid can form ice on the windshield, blocking
your vision.

Rear Window Washer/ Wiper (If Equipped)

The rear window 
wiper switch is located 
in the instrument 
panel switchbank.

Press the wiper symbol on the bottom of the switch to
turn on the intermittent wiper. To turn off the wiper,
gently press the top of the switch.

To wash and wipe the rear window, press in the washer
symbol on the top of the switch. Washer fluid will run
down the glass as long as the switch is held in. When the
top of the switch is released, the wiper will continue to
cycle three more times. There is only one windshield
washer fluid reservoir for the front and rear windshield
wipers. See “Windshield Washer Fluid” in the Index.

Содержание 2002 Venture







































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды