manualshive.com logo in svg

Chevrolet 2002 Venture, Руководство пользователя

Поделиться
Скачать
Chevrolet 2002 Venture Скачать руководство пользователя страница 121

2-13

If the sliding door(s) is locked, first unlock all doors,
then press the van symbol to open the sliding door(s).
The parking lamps will flash when the right power
sliding door button is pressed and they will not flash
when the left power sliding door button is pressed. 
Press the van symbol again to close the sliding door(s).
See “Remote Driver’s Door and All Door Unlock”
earlier in this section and “Power Sliding Door” later in
this section.

You can operate the power sliding door(s) with the
remote keyless entry transmitter only when the power
sliding door override switch(es) on the overhead console
is turned off. See “Power Sliding Door” later in 
this section.

If the vehicle’s fuel filler door is opened, the driver’s
side power sliding door will not open completely. 
Do not try to force the door. Once the fuel filler door 
is closed, the driver’s side sliding door can be 
opened normally.

Matching Transmitter(s) to Your Vehicle

Each remote keyless entry transmitter is coded to
prevent another transmitter from unlocking your vehicle.
If a transmitter is lost or stolen, a replacement can be
purchased through your dealer. Remember to bring any
remaining transmitters with you when you go to your
dealer. When the dealer matches the replacement
transmitter to your vehicle, any remaining transmitters
must also be matched. Once your dealer has coded the
new transmitter, the lost transmitter will not unlock your
vehicle. Each vehicle can have a maximum of four
transmitters matched to it.

See your dealer to match transmitters to another vehicle.

Содержание 2002 Venture







































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды