Chevrolet 2002 Venture Скачать руководство пользователя страница 322

Страница: 322 / 486

4-31

Dinghy Towing

Your vehicle was not designed to be towed with all of its
wheels on the ground. If you have a two

wheel

drive

vehicle, it can be towed with two of its wheels on the
ground. See “Dolly Towing” following. If you have an
all

wheel

drive vehicle, it cannot be towed with any of

its wheels on the ground. It can be towed with car
carrier equipment.

NOTICE:

Towing an all

wheel

drive vehicle with all four

wheels on the ground, or even with only two of its
wheels on the ground, will damage drivetrain
components. Don’t tow an all

wheel

drive vehicle

if any of its wheels will be on the ground.

Dolly Towing

If you have a two

wheel

drive vehicle, it can be towed

with two of its wheels on the ground. To dolly tow your
vehicle, do the following:

1. Put the front wheels on a dolly.

2. Put the vehicle in PARK (P).

3. Set the parking brake and then remove the key.

4. Clamp the steering wheel in a straight

ahead position

with a clamping device designed for towing.

5. Release the parking brake.

If you have an all

wheel

drive vehicle, it cannot be

towed with any of its wheels on the ground. It can be
towed with car carrier equipment.

NOTICE:

Towing an all

wheel

drive vehicle with all four

wheels on the ground, or even with only two of its
wheels on the ground, will damage drivetrain
components. Don’t tow an all

wheel

drive vehicle

if any of its wheels will be on the ground.

Содержание 2002 Venture






































































































































































































































































































































































































































































































Результаты поиска

Содержание 2002 Venture

Отзывы:

Бренды по названию

Популярные бренды

Chevrolet 2002 Venture, Руководство пользователя

Результаты поиска

Содержание 2002 Venture

Отзывы:

Бренды по названию

Популярные бренды