71
Resetting the Appliance
IMPORTANT
– Ensure the appliance is cold.
If the appliance is functioning incorrectly the reset button on the controls box can be reset by
pushing down the lever then releasing as soon as a beep has been heard (
do not hold
) (see
fig. 173).
This will then reset the system.
Fig. 173
Cleaning
Cleaning should only be carried out when the fire is turned off and cold.
This appliance contains no asbestos.
Cleaning Paintwork
Use a clean soft dry brush to remove dirt and debris from the appliance.
If the appliance has ingrained dirt use soapy water to dampen a soft cloth and use to clean.
Cleaning Glass
The glass is specially formulated to withstand very high temperatures use a mild glass cleaner.
Use a soft cloth to avoid scratches that may weaken the glass.
Follow instructions for removing the glass.
Important Notes
Ensure the appliance is cold.
Care must be taken when using the allen key to prevent damage to paintwork.
Ensure the glass is clean on both sides as dirt; oils etcetera can etch the glass.
Do not clean with abrasive materials as this can accelerate dirt accumulation and
weaken the glass.
Ensure the glass is fitted correctly to avoid spillage.
Check spillage after carrying out work.
The glass may collect a white powdery residue on the inside of the glass this is a combination
of minerals and acids in the gas.
It is known the longer left on the glass the harder it is to remove. It is recommended to use
‘White Off’ by Rutland or ‘Brasso’ following the directions specified on the bottle. This can be
purchased from fireplace companies / hardware supplies.
Содержание Alchemy GFL850URN
Страница 1: ...0...
Страница 5: ...4 Fig 7 Smoke Match Holder Fig 8 Remote Control Handset Fig 9 Pressure Test and Isolation Valve...
Страница 15: ...14 Fig 23...
Страница 49: ...48 Fig M10...
