56
Pilot Removal
Work should only be carried out by a competent person and all gas work be carried out by a
qualified person in accordance with national and local regulations.
The pilot to be exchanged must be a genuine like for like part (see fig. 141 and 142)
Fig. 141
Fig. 142
Part
– Seagas P4-41
Marking P441
Ensure the appliance is cold before commencing work.
Remove the glass.
Isolate the appliance and remove the urn, burner and Rimex base.
Disconnect the main 8mm gas supply pipe from the test point, the battery extension lead and
disconnect the wiring attached to the burner assembly.
Remove the pilot bracket screws (see fig. 143) Remove the spark lead (see fig. 144)
Fig. 143
Fig. 144
Undo the 4mm pipe with a 10mm spanner (see fig. 145) and disconnect from the pilot.
Remove the bracket (see fig. 146).
Fig. 145
Fig. 146
Содержание Alchemy GFL850URN
Страница 1: ...0...
Страница 5: ...4 Fig 7 Smoke Match Holder Fig 8 Remote Control Handset Fig 9 Pressure Test and Isolation Valve...
Страница 15: ...14 Fig 23...
Страница 49: ...48 Fig M10...
