Smart Dry Contact Switch 7 - Operating Instructions
1
Device description
Smart Dry Contact Switch 7 can
turn ON and OFF
equipment’s
with an independent power supply
, such as solenoid
valves (e.g. gas, water and irrigation), power operated valves etc.
It is very easy to install and
works with both momentary and toggle switches
.
It operates in any Z-Wave
™
network with other Z-Wave
™
/Z-Wave Plus
™
certified devices and controllers from any
other manufacturer. As a constantly powered node, the device will act as repeater regardless of the vendor in order to
increase the reliability of the network.
This device is a security enabled Z-Wave Plus
™
product that is able to use encrypted Z-Wave Plus
™
messages to
communicate to other security enabled Z-Wave Plus
™
products.
This device must be used in conjunction with a Security Enabled Z-Wave
™
Controller in order to fully utilize all
implemented functions.
In its ZRX variant the device can also be controlled by Cherubini Remote Controls of SKIPPER - POP OR GIRO series.
Integrated Button
1 or 3 clicks to enter in Learn Mode
6 clicks to reset the system to manufacturer's settings
2 clicks to enter in Offline setup mode
Power Supply
1, 2
–
Null
6 - Line
Input Switch
3
–
Input - Line signal
Output
4, 5
–
Dry Contact
1 2 3 4 5 6
Integrated Button
with LED indicator
