Checkline ETB, Руководство по эксплуатации

Страница: 19 / 26

–18 –
8.0 SERVICE AND MAINTENANCE
The tension meter is easy to maintain. Depending on operating time and load, the
instrument should be checked according to the locally valid regulations and conditions
(as described in Chapter 3.6.3). The use of other test methods than the procedure
described in Chapter 3.6.3 may cause deviating measuring results.
8.1 Rollers
To order spare rollers:
Model: ETB-100 (given on rear side of tension meter)
Serial number: 420 - 88888 (given on rear side of tension meter)
Standard rollers:
Model number: R542017
Delivery: 1 set (3 pcs.) of spare rollers 2000 m/min
To order ceramic pins:
Model: ETPB-100 (given on rear side of tension meter)
Serial number: 420-88888 (given on rear side of tension meter)
Ceramic pins:
Model number: R542020
Delivery: 1 set (3 pcs.) of spare ceramic pins 6000 m/min
8.2 Replacing the rollers/ceramic pins
NOTE:
Replacing rollers by ceramic pins or ceramic pins by rollers can only be
performed at the manufacturer‘s facility.
Required tools: Screwdriver with 1.5 mm blade width open end
wrench with 4 mm jaw width.
To remove the filament guide