Check Point L-71, Руководство администратора

Страница: 73 / 124

Appliance Configuration
Check Point 1400 Appliances Centrally Managed Administration Guide R77.20.85 | 73
To turn off Hotspot:
1. Go to
Device
>
Advanced Settings
.
2. Search for Hotspot and double-click the entry.
3. Select
Disabled.
4. Click Apply .
To configure Hotspot for an interface:
1. Click
Configure in Local Network
.
The
Local Network
window opens.
2. Select interface and click
Edit
.
The Edit <interface> window opens.
3. Select
Use Hotspot
.
4. Click
Apply
.
Any user that browses from configured interfaces is redirected to the Check Point Hotspot portal.
To configure Hotspot exceptions:
1. Click
Manage Exceptions
.
The Manage Hotspot Network Objects Exceptions window opens.
2. Select the objects to add as exceptions.
The Selected Network Objects window shows the selected objects. To remove an object from
the list, click the
x next to it.
3. To filter the object list, enter the filter value. The list shows the objects that match the filter.
4. If necessary, click
New
to add new objects to the list. For information on how to create a new
object, see the
Users & Objects
>
Network Objects
page.
5. Click Apply .
The added objects are excluded from the Hotspot.
To require user authentication:
1. Select the Require Authentication checkbox.
2. You can allow access to
All users
or to a
Specific user group
.
3. If you selected Specific user group , enter the group's name in the text box.
4. Click
Apply
.
Any user/user group that browses from configured interfaces is redirected to the Check Point
Hotspot portal and must enter authentication credentials.
To configure the session timeout:
1. In
Session timeout
, enter the number of minutes that defines how long a user stays logged in
to the session before it is ends.
2. Click Apply .
To customize the portal appearance:
1. Click Customize Hotspot portal .
2. For
Portal title
- Keep the default or enter a different title.
3. For
Portal message
- Keep the default or enter a different message.