Appliance Configuration
Check Point 1400 Appliances Centrally Managed Administration Guide R77.20.85 | 58
IPv6 connection types:
Note -
The device can have only a single IPv6 Internet connection.
•
Static IPv6 -
A fixed (non-dynamic) IP address.
•
Obtain automatically (DHCPv6/SLAAC)
- In both Dynamic Host Configuration Protocol
(DHCP) and Stateless Address Auto Configuration (SLAAC) the user does not set the IP as
this is handled by the router/DHCP server. DHCPv6 issues a full IP address. SLAAC issues
an IP address prefix, and the gateway completes the rest of the address according to
discovery protocols.
•
PPPoE (IPv6 only)
- A network protocol to encapsulate Point-to-Point Protocol (PPP)
frames inside Ethernet frames. It is used mainly with DSL services where individual users
connect to the DSL modem over Ethernet and Metro Ethernet networks.
•
PPPoE (IPv4/IPv6)
- Same as
PPPoE ( IPv6 only)
, but the user must first configure a type
IPv4 PPPoE internet connection on the same interface. Use this option when the ISP
provides both IPv4 and IPv6 addresses through the same PPPoE connection. This prevents
the need to define the same dialer connection details more than once.
•
IPv6 Bridge -
A Layer 2 bridge between internal and external networks, containing both
IPv4 and IPv6 addresses (or just IPv6) to make the gateway reachable through the bridge in
a dual stack/pure IPv6 network.
For PPPoE over ATM over VDSL/ADSL or IPoE over ATM over VDSL/ADSL or for an ADSL interface:
Enter the
VPI number
and
VCI number
you received from your service provider, and the
Encapsulation
type
(LLC or VC_MUX).
For WAN/DMZ interfaces and static, DHCP, PPPoE, PPTP, and L2TP connection types
Or
For VDSL/ADSL interfaces and IPoE - dynamic IP and IPoE - static IP connection types over PTM:
•
Use connection as VLAN
- Select this checkbox to add a virtual Internet interface.
•
VLAN ID
- Enter a VLAN ID between 1 and 4094.
If you are in an Annex L system, in Advanced Settings, you must enable the Annex L and
disable the Annex J/M.
If you are in an Annex M system, in Advanced Settings, you must enable Annex J/M and disable
the Annex L. In all other Annex systems, no changes are needed to the default configuration.
Notes:
•
Multiple internet connections can be established over a single VDSL/ADSL connection carrying
PTM traffic or in the case of WAN and DMZ interfaces.
•
Only one internet connection can be established over a VDSL/ADSL interface carrying ATM
traffic or a USB interface.
•
One IPoE or PPPoE connection can be established over ATM running over the DSL interface.
•
A single IPoE connection or multiple PPPoE connections can be established over one untagged
DSL interface carrying PTM traffic.
•
A single IPoE connection or multiple PPPoE connections can be established over one VLAN
tagged DSL interface carrying PTM traffic.
•
A single DHCP or Static IP connection can be established over a USB interface.
Содержание L-71
Страница 122: ......
