Check Point L-71, Руководство администратора

Страница: 103 / 124

Appliance Configuration
Check Point 1400 Appliances Centrally Managed Administration Guide R77.20.85 | 103
To create a new service:
1. Click
New
.
2. In the Service tab, enter information in the fields that apply to the type of service you select.
Note that not all fields may show:
• Name - Enter the service's name.
• Type - Select the service type from the list:

TCP

UDP

ICMP - Select this option if it is necessary to represent a specified option in the ICMP
protocol. Note that this is an advanced option.

Other - Select this option to represent any IP protocol other than TCP or UDP.
• Ports - Enter the port(s) if you selected Type - TCP or UDP. Port numbers and/or ranges
can be entered by separating with commas.
• IP Protocol - Enter the IP protocol if you selected Type - Other.
• ICMP type
and
ICMP code
- Enter the ICMP type and code that you want the service object
to represent as listed in RFC 792. This option is only relevant if you selected Type - ICMP.
• Comments - Enter an optional comment.
• Disable inspection for this service – Select this checkbox to disable deep inspection of
traffic matching this service. This option is only available for built-in services.
3. Click
Apply
.
To edit a service:
1. Select a service from the list.
2. Click Edit .
3. Make the necessary changes. Note that not all fields can be edited.
4. Click
Apply
.
To delete a service:
1. Select the service from the list. Note that you can only delete a user defined service.
2. Click Delete .
3. Click
Yes
in the confirmation message.
To filter for a specified service:
1. In the
Type to filter
box, enter the service name or part of it.
2. As you enter text, the list is filtered and shows matching results.