Chattanooga Intelect RPW 2, Руководство пользователя

Страница: 71 / 95

71
V-ACTOR HF HANDPIECE OPERATIONS, SET-UP, CLEANING, AND MAINTENANCE EN
INTELECT
®
RPW 2 USER MANUAL
CLEANING, MAINTENANCE, OVERHAUL
CHANGING THE VIBRATION
TRANSMITTERS V25 AND V10
• To remove the 25 mm vibration transmitter or the 10 mm
spherical vibration transmitter, unscrew the vibration
transmitter screw cap (1) from the handpiece and pull out
the vibration transmitter (2).
• Clean all parts of the vibration transmitter as described on
page 73.
• Allow vibration transmitter to air dry
• Reassemble the vibration transmitter in reverse order.
• Screw the new vibration transmitter onto the handpiece
until finger-tight.
V40
1 Front cap
2 Vibration transmitter head
3 Sealing ring
4 Spring element
5 Rear cap
6 Cut
7 Lower lip
• To remove the V40 vibration transmitter, unscrew the
vibration transmitter from the handpiece.
• Unscrew the vibration transmitter screw cap (1 and 5) and
pull out the shock transmitter.
• Remove the sealing ring (3) by pressing it apart at the
cut-through point (6).
• To clean, press the spring element (4) together slightly
and remove the residue underneath it. Do not attempt to
remove this portion of the transmitter!
• Clean all parts of the vibration transmitter as described on
page 73 and allow to air dry. When reassembling the V40,
note that the sealing ring has a lower lip (7) that needs to
face outward when reassembled.
• Reassemble the vibration transmitter in reverse order.
• Make sure that the smooth side of the sealing ring (3) is in
contact with the vibration transmitter head (2).
• Screw the new vibration transmitter onto the handpiece
until finger-tight.
*V-Actor is a registered trade mark of Storz medical AG
2
1
1 2 3 4 5
6
7