Chattanooga Intelect RPW 2, Руководство пользователя

Страница: 79 / 95

79
CLEANING, MAINTENANCE, OVERHAUL EN
INTELECT
®
RPW 2 USER MANUAL
SPINE AND FASCIAE SHOCK
TRANSMITTERS
1. Disconnect the handpiece from the control device.
The spine or fasciae transmitter set contents a special clutch
for mounting the spine or fasciae transmitters. The shock
transmitter can only be mounted if the clutch has already
been screwed on the handpiece.
2. Screw the clutch onto the handpiece.
3. Take out the desired shock transmitter from the case.
4. Push the inner part of the clutch in direction to the shaft
of the handpiece (1).
• Push the shock transmitter into the clutch (2).
5. Release the inner part of the clutch.
• The shock transmitter engages into its place.
Note: Before starting with treatment make sure that the shock
transmitter is engaged into its place.
6. To disassemble the shock transmitter proceed as follows:
• Push the inner part of the clutch in direction to the
shaft of the handpiece
• Pull the shock transmitter out of the clutch.