Channel Vision SD16, Инструкция, Страница: 31 / 88

Motion Setup Menu
In the Camera Setup menu, Use the Enter button to call up the Motion Setup menu.The Motion setup
allows the administrator to define how the system responds when motion is detected by the
corresponding channel. General operations of this menu are defined below.
•
▲▼
(
Mouse: Left click)
Use these buttons to select the desired
menu or area.
• Numeric: (Enter)
Use these buttons to select the camera.
• COPY:
Use this button to copy the Motion
settings, including motion detection
settings, of the current camera to all
the additional cameras.
• Esc: (Mouse: Right Click) Use this button
to escape from the current screen, and
return to the previous menu. If the Save
dialog is shown, press Enter to exit and
save, or Esc (Mouse: Right Click) to exit
without saving.
• Duration: This option defines the response duration (in seconds) the Alarm Out relay & the Buzzer
will be triggered after motion is detected on the corresponding camera. However, the Alarm Out
relay and the Buzzer will reset immediately once the camera state returns to normal. Use the +/-
buttons to adjust the value (3 seconds - 60 minutes, discrete, ‘-‘ for ‘Forever’).
• Camera to go: This defines what preset position the camera is set to go to if video loss is detected
on the corresponding camera. “Camera to go” is a function meant specifically for a PTZ camera.
• Goto Preset: This defines the preset position on the “Camera to go” channel if motion is
detected on the corresponding camera.
• Pre-record: This defines how long video will be saved if motion is detected on the corresponding
camera. Use the +/- buttons to adjust the value (0-10 seconds, discrete). The actual pre-recorded
time may be shorter than the value set if the size of the pre-recorded file exceeds the designated
buffering size of the DVR’s memory.
• Post-record: This defines how long video will be saved after motion is detected on the
corresponding camera. Use the +/- buttons to adjust the value (0 second - 60 minutes, discrete).
• Alarm Out: This option defines which Alarm Output will be triggered when motion on the
corresponding camera is detected. Use the +/- buttons to select none (N/A) or one of the Alarm
Outputs (1-4).
• Buzzer: This option defines whether or not to activate the internal buzzer when motion on the
corresponding camera is detected. Use the Enter or +/- (Mouse: Left click) to check/uncheck
this option. By default, this setting is checked.
• Log: This defines whether or not system events are logged. Click Enter or +/- to check/uncheck
this option. By default, this setting is checked.
• Screen Message: This option defines whether the event message appears on the screen or not.
Use the Enter button or +/- to check/uncheck this option. By default, this setting is checked.
◄►:
31