Channel Vision SD16 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 88

Channel Vision SD16 Скачать руководство пользователя страница 24

Backing Up & Exporting Video

In the Main Menu, press

▲▼

to change the highlighted option to Backup Device, and then

press Enter to Enter the Backup menu.

If you choose to install a DVD drive into the DVR, it is important to note the following requirements.
Compatible types of drives and media are DVD+RW, DVD+R, and DVD-R. DVD-RW drives or disks
are not supported. The general operations of this menu are described below:

•

▲▼

Use these buttons to select the desired menu.

• Esc:

(Mouse: Right Click) Use this button to escape from the current screen, and return to the

previous menu. If the Save dialog is shown, press Enter to exit and save, or Esc (Mouse: Right
Click) to exit without saving.

• Mode

Eject the tray and disconnect. (Internal DVD only)

• Seq

Load the tray and connect. (Internal DVD only)

• Connect/Disconnect

one of the USB ports of the system and/or

insert a DVD for DVD. Then,

(Mouse: Left click) to command the system to connect with the device you connected.

If the device is already connected and working, read/write will be shown in the Status menu.
To remove the drive or device when complete, press Enter (Mouse: Left click) to command the
DVR to disconnect from the connected device.

Below are some common troubleshooting steps if there are any issues with backing up data.

A. Do not format the DVD before using it. Let the DVR format it.
B. Before using USB/Thumb drive, format it using the FAT32 file system.
C: Before you can copy anything, the DVR must detect the device you plugged into it.
If the DVR will not detect your device, unplug the device, reboot the DVR, and plug it into the
USB port again.
D: Some backup devices may have compatibility issues if they use non standard drivers.

• Backup

Press Enter (Mouse: Left click) when this icon is selected to backup the configuration of your
DVR to the connected USB device.

• Restore

Press Enter (Mouse: Left click) when this item is selected to restore the configuration files from
the connected USB device. It is also possible to Enter the specific directory in which the backed up
configuration file is stored.

◄►

◄►

:

:

:

:

First, plug your USB/DVD into

check the status menu to verify the system is detecting the drive or

DVD.

:

(Backing up the DVR settings)

:

(Restoring previously saved DVR settings)

24

«
...
22
23
24
25
26
...
»

Содержание SD16

























































































Отзывы:

Нет отзывов