Channel Vision SD16, Инструкция, Страница: 17 / 88

Basic Operation Continued
In many cases, the DVR will require you to enter text such as the system login, camera title setup,
etc. The steps to enter text are outlined below.
1. Press Enter to edit the highlighted option.
The flashing cursor is shown to indicate the editing point.
2. Press ◄► to move the cursor to the left/right.
3. Press Code in text editing mode to change the text case. (If the entry you are on will accept
numbers only, pressing code will have no effect.) Indicators show the current state.
123 = Number only
abc = No capital letters
ABC = All capital letters
CODE = Internal code for the selected language, such as Chinese, Japanese, etc.
4. Press a number key (1-9, 0) repeatedly until the character you want appears. (1 for 1 or space,
2 for 2, a/A, b/B, or c/C, the others as shown on the keypad) If internal code is selected, a code
box will be shown (after the first code is Entered) for each new code to be Entered. Check the
internal code table for the selected language. For a 2-byte code, e.g. Chinese or Japanese, the
accepted codes are from 0000 - FFFF.
5. Press Mark to bring up a list of punctuation marks and special characters. The highlighted
character on the list shows what is selected. Use
▲
,
▼
,
◄, & ►
to change the selection.
6. If you make a mistake, press Backspace to remove the character to the left of the cursor, or
press Del to delete the character at the current cursor position.
7. In text editing mode, internal code box, and mark list, press Enter to exit and save changes,
or press Esc to exit without saving changes.
17