MO DAY YEAR
Champion Aerospace LLC
1230 Old Norris Road
Liberty, South Carolina, U.S.A. 29657
© 2009 Champion Aerospace LLC
www.championaerospace.com
CHAMPION AEROSPACE LLC PROPRIETARY INFORMATION - Subject to the restrictions on the Title page
ISSUED
PAGE REV.
PAGE NO.
REVISED
MO DAY YEAR
01
18
96
L-1502
03
01
09
C
2-8
2.2.15 Install Low Voltage Control Harness (See Figure 2-6)
M-5430 connector lubricant is used with the LASAR
®
LVCH to lubricate and protect the contact
surfaces from fretting, oxidation, and subsequent intermittent electrical contact.
A liberal amount of M-5430 lubricant should be applied to all male and female contacts and to the
connector mating surfaces. Sufficient lubricant should be applied to provide 100% coverage of the
contact surfaces.
NOTE
: Connectors lubricated with M-5430 can easily become contaminated with dirt and other foreign
matter. Special handling precautions must be followed to ensure that all connector and contact
surfaces are free from all contaminants prior to assembly.
CAUTION
:
DO NOT ATTEMPT TO CLEAN CONNECTORS USING COMPRESSED AIR OR BY
INSERTING TOOLS, TEST PROBES, COTTON SWABS, BRUSHES, OR ANY OTHER
OBJECTS INTO THE CONTACT AREAS. CONTAMINATED CONNECTORS MAY BE
CLEANED BY IRRIGATION WITH ISOPROPYL ALCOHOL OR MINERAL SPIRITS.
A.
Apply a liberal amount of M-5430 connector lubricant to each connector mating surfaces and to
all pin and socket contacts. Attach the left low voltage control harness (10 pin connector) to the
left magneto. Attach the right low voltage control harness (8 pin connector) to the right magneto.
Figure 2-6
LVCH Wiring Diagram
Comm Port
To Computer
(Optional)
Magneto
“P” Leads
Blue
Green
Cockpit
Enunciator
Orange
Purple
White
CHT Probe
Right Magneto
Left Magneto
Brown
10 Amp
Fuse/Breaker
Red
Engine Intake
Manifold
Vacuum
Hose
To
+V
Master Relay
Cockpit
Engine
Compartment
Right
LCVH
Connector
(8
Pin)
Left
LCVH
Connector
(10
Pin)
Tachometer
(Optional)
To
Ground
Black
Pressure
Restrictor
Left
Right
To
+V
Battery
Manifold
Pressure
Port
LASAR
