MO DAY YEAR
Champion Aerospace LLC
1230 Old Norris Road
Liberty, South Carolina, U.S.A. 29657
© 2009 Champion Aerospace LLC
www.championaerospace.com
CHAMPION AEROSPACE LLC PROPRIETARY INFORMATION - Subject to the restrictions on the Title page
ISSUED
PAGE REV.
PAGE NO.
REVISED
MO DAY YEAR
01
18
96
L-1502
03
01
09
C
0-2
C.
Copyright And Title: No title to the intellectual property in the software programs or material is
transferred to the Purchaser under this License. All software and its copyrights are owned by
Champion Aerospace and/or its suppliers. The software is protected by United States Copyright
Laws and International Treaty Provisions. The written materials, software and firmware may not be
copied.
D.
Restrictions: The software contains trade secrets and critical engine operating parameters and
should not be accessed, altered or changed in any matter. The software is protected by a
security system function and any attempt to access, alter or change the software in any form not
approved by Champion Aerospace will void this License and the product warranty, cause the
system to no longer conform to airworthiness standards, and render the system unairworthy, which
can result in equipment damage, personal loss, bodily injury, or death.
0.3
GENUINE SLICK PARTS
The procedures outlined in this manual are generalized for all models of LASAR
®
systems, using only
genuine Champion Aerospace manufactured parts. This manual must not be used to maintain or over-
haul a LASAR
®
system that contains parts not manufactured by Champion Aerospace.
Genuine Slick parts are produced and inspected under rigorous procedures to insure airworthiness and
suitability in LASAR
®
systems. Parts purchased from sources other than Champion Aerospace, even
though outwardly identical in appearance may not have had the required tests and inspections per-
formed, may be different in fabrication techniques and materials, and may be dangerous when installed in
a LASAR
®
system. Salvaged parts, reworked parts obtained from non-Champion Aerospace approved
sources, or parts the service history of which is unknown or cannot be authenticated, may have been
subjected to unacceptable stresses or temperatures, or have other hidden damage, not discernible
through routine visual or usual nondestructive testing techniques. This may render service work with this
part, even through originally manufactured by Champion Aerospace, unsuitable or unsafe for use in a
LASAR
®
system. Champion Aerospace expressly disclaims any responsibility for malfunctions, failures,
damage or injury caused by use of non-Champion Aerospace approved parts.
LASAR
®
systems are engineered so that mechanical parts wear at a balanced rate. Consistent and
complimentary wear patterns establish the recommended maintenance intervals defined in LASAR
®
service literature, therefore used, service worn parts should never be used to troubleshoot or repair a
system component, nor should original parts be replaced by used service worn parts on magnetos
being returned to service. Further, non-Champion Aerospace manufactured parts may wear at uneven
and different rates than original Champion Aerospace manufactured parts, making LASAR
®
service
literature an inappropriate guide to proper maintenance. Parts not manufactured by Slick, may not fit or
operate like original Champion Aerospace manufactured parts. Non-Champion Aerospace products are
not tested to the same standards as originally installed parts and are not authorized for replacement.
For these reasons, used service worn parts or parts not manufactured by Champion Aerospace may
adversely affect magneto reliability in ways not anticipated by Champion Aerospace and not reflected in
service literature.
0.4
RELEVANT PUBLICATIONS
L-1500 LASAR
®
System Master Service Manual which includes:
L-1501 T-300 SynchroLASAR
®
Manual
L-1503 LASAR
®
System Maintenance and Overhaul Manual
L-1504 LASAR
®
Application Guide
LASAR
®
STC and Service Letters appropriate to each installation
F-1100 Slick Master Manual which includes:
L-1177 Ignition Lead Maintenance and Overhaul Manual
L-1178 Ignition Lead Assembly and Installation Manual
L-1318 Application Data
