1 Minute Wash Cycle Setting
Wash
= 44
seconds
Final rinse
= 13
seconds
Dwell
= 11
seconds (completion of cycle)
6 Minute Wash Cycle Setting
Wash
= 336
seconds (5 min 36 sec)
Final rinse
= 13
seconds
Dwell
= 11
seconds (completion of cycle)
3 Minute Wash Cycle Setting
Wash
= 156
seconds (2 min 36 sec)
Final rinse
= 13
seconds
Dwell
= 11
seconds (completion of cycle)
2 Minute Wash Cycle Setting
Wash
= 96
seconds (1 min 36 sec)
Final rinse
= 13
seconds
Dwell
= 11
seconds (completion of cycle)
10
INITIAL START-UP
(Cont.)
The Wash Cycle
Selector Switch
The wash cycle selector switch provides
the option of choosing four different
dishwasher cycle times.
To select a cycle time —
Make sure power is on and the dishwasher
has completed its last cycle.
Turn the selector knob to the desired time as
indicated on the control panel.
DO NOT
raise
the doors at this time. If doors are raised cycle
time selected will not be remembered.
Open the doors and replace the clean rack of dishes
with soiled rack.
Close the doors.
The dishwasher will begin the cycle automatically.
If the timed fill is activated due to a loss of water, the
cycle will stop. When the dishwasher is full the auto-
matic cycle will resume where it left off.
The maximum total wash cycle time is 6 minutes.
For example: You can not select 3 minutes then
turn the switch to 6 minutes during the automatic
cycle to extend the total cycle to 9 minutes.
The dishwasher cycle times are listed below:
15
INITIAL START-UP
POWER
CYCLE
3 MIN
6 MIN
1 MIN
2 MIN
WASH CYCLE
RINSE PRESSURE
WASH TEMPERATURE
ON
OFF
Содержание D-H1T
Страница 37: ...REPLACEMENT PARTS 31 REPLACEMENT PARTS ...
Страница 38: ...Figure 19 D HBT D H1T Panels REPLACEMENT PARTS 32 7 12 10 10 11 11 10 6 1 5 9 6 8 2 3 4 9 9 7 8 ...
Страница 70: ...Figure 35 Dishracks and PRV REPLACEMENT PARTS 64 1 2 3 ...
Страница 73: ...REPLACEMENT PARTS 67 ELECTRICAL SCHEMATICS ...