CHAINTECH CT-9PJL, Руководство пользователя

Страница: 46 / 81

Chapter 3
support.
2. On-Chip Primary/Secondary PCI IDE
You can set this to disable the On Chip IDE controller if you are going to add a
higher performance IDE board.
3. IDE Primary/Secondary Master/Slave PIO:
The four IDE PIO (programmed Input/Output) fields let you set a PIO mode (0-4)
for each IDE device that the internal PCI IDE interface supports. Modes 0 through
4 provide successively increased performance. In Auto mode, the system
automatically determines the best mode for each device.
4. IDE Primary/Secondary Master/Slave UDMA:
Ultra DMA implementation is possible only if your IDE device supports it and
your operating environment contains a DMA driver. If both your hard drive and
software support Ultra DMA, select [
Auto ] to enable BIOS support.
5. SATA Mode
Available options are [ IDE ] and [ RAID ].
6. On-Chip Serial ATA
Available options are [ Disabled ], [ Auto ], [ Combined Mode ], [ Enhanced Mode ],
[ SATA Only ].
Disabled: Disabled Serial ATA controller.
Auto: Auto arrange by BIOS.
Combined Mode: Parallel ATA and serial ATA are combined. Maximum of
two IDE drives are supported.
Enhanced Mode: Enable both serial ATA and parallel ATA. Max of six
IDE drives is supported.
SATA Only: Serial ATA is operating in legacy mode.
7. Serial ATA Port 0 Mode
Please leave the default value as [ Primary Master ] for a stable system operation.
Onboard Device:
This section provides information for setting the on-board devices. Press [ Enter ] to
enter the sub-menu, which contains the following items for some advanced controls:
1. USB controller:
Enable the on-board Universal Serial Bus (USB V1.1 or V2.0) controller if you
want to connect a USB device to your system. Note that if this setting is disabled,
you can still temporarily use a USB keyboard during boot up so that you can enter
BIOS and enable this setting. If you pass the boot up stage without enabling this
function, your PS/2 keyboard will no longer work.
40