CHAINTECH CT-9PJL, Руководство пользователя

Страница: 25 / 81

Chapter 3
IDE 1/2 (IDE Hard-Disk Connector)
The motherboard has a 32-bit Enhanced PCI IDE and Ultra ATA66/100 controller
that provides PIO mode 0~4, Bus Master, and Ultra ATA66/100 function. This
connector is used for connecting 40 pins of ATAPI devices.
IDE 1 only connects two IDE devices. (
Primary Master/Slave)
IDE 2 only connects two IDE devices. ( Secondary Master/Slave)
Please refer to Section 2-6 Serial ATA and Parallel ATA for details.
JP1 (CMOS Clear Jumper):
Pin Definition
1-2 Normal (default)
2-3 Clear CMOS Data
There is a CMOS RAM on board that has a power supply from external battery to
keep the data and system configuration. To clear the contents of the CMOS, please
follow the steps below.
1. Disconnect the system power supply from the power source.
2. Set the jumper cap at location [
2-3 ] for < 5 seconds >, and then set it back to the
default position.
19