CHAINTECH CT-9PJL, Руководство пользователя

Страница: 17 / 81

Chapter 3
2-3 Main Memory Configuration
This motherboard provides four 184pin Double Data Rate (DDR) Dual-In-line
Memory Modules (DIMM) slots, which supports PC2100/2700/3200 DDR SDRAM
modules up to 4GB. Install at least one DIMM module on the slots. Memory
modules can be installed on the slots in any order. You can install either single- or
double-sided modules to meet your own needs.
To install your DDR Modules please follow these steps below:
1. Unlock a DIMM socket by pressing the retaining clips outward. The DDR Modules
has only one notch at the center of module. The DDR module will only fit in the right
position.
2. Insert the DDR Module vertically into the DIMM slot, with the correct alignment.
Then push it in until the golden finger on the memory module is deeply inserted into
the socket.
3. The plastic clip on each side of the DIMM slot will automatically close to hold the
DDR Modules in place.
11