CHAINTECH CT-9PJL, Руководство пользователя

Страница: 45 / 81

Chapter 3
allocation in that the AGP card will only use the amount of memory that it needs.
The remaining unused memory is also available for system usage. For example, if
16MB is allocated to the AGP card and the card only needs 8MB, the remaining
8MB will be available for system usage.
Init Display First
This function allows users to choose between AGP and PCI slots to initialize
monitor display.
3-4 Integrated Peripherals
This section provides information on setting up the peripheral devices. By choosing
the Integrated Peripherals option from the CMOS Setup Utility menu (Figure 3-1),
the screen that lists the manufacturer's default values for the motherboard is
displayed below.
Figure 3-5 Integrated Peripherals Screen
OnChip IDE Device:
Press [ Enter ] to enter the sub-menu, which contains the following items for some
advanced control:
1. IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple sector
read/write. If your IDE hard-drive supports block mode, select Enabled to
auto-detect the optimal number of block read/writes per sector the drive can
39