Chapter 3
repeating.
Security Option
The Supervisor and/or User Password functions shown in Figure 3-1 must be set to take
advantage of this function. See Section 3.11 for password setting information. When the
Security Option is set to System, a password must be entered to boot the system or enter
the BIOS setup program. When the Security Option is set to Setup, a password is required
to enter the BIOS setup program.
APIC Mode
This item can enable or disable APIC (
Advanced Programmable Interrupt Controller
)
mode. In compliance to PC2001 design guide, the system is able to run in APIC mode.
Enabling APIC mode will increase the available IRQs resources for the system. Available
options are [
Enabled
] and [
Disabled
].
MPS Version Control For OS
This item allows you to select which MPS (
Multi-Processor Specification
) version to be
used for the operating system. You need to select the MPS version which is supported by
your operating system. To find out which version to use, consult the vendor of your
operating system. Available options are [
1.4
] and [
1.1
].
OS Select For DRAM >64MB
If your system's DRAM is larger than 64MB and you are running OS/2, select OS/2 as
the item value. Otherwise, set the item value to Non-OS/2 for all other operating systems.
HDD S.M.A.R.T. Capability
This field allows you to enable or disable the S.M.A.R.T. (Self-Monitoring, Analysis and
Reporting Technology) system that utilizes internal hard-disk drive monitoring
technology. This parameter is normally disabled because the resources used in the
SMART monitoring feature may decrease the system performance.
Video BIOS Shadow
Enabling this function will allow the Graphic card’s BIOS setting to be recorded in the
RAM for a better performance. Leave the default setting at Enabled for a better system
performance.
Small Logo (EPA) Show
This setup allows photo that is EPA. Logo.
Show POST CODE
Enabling this function will display the available POST error code on the screen before
proceeding to the operating system.
22
Содержание 7VIF3
