Total Harmonic Dist Noise (THD+N)
<0.0015% (SACD, balanced and single-ended)
<0.002% (CD, balanced and single-ended)
Monaural Analog Audio outputs (Monaural ANALOG_OUT board, one channel per board)
Balanced outputs
True balanced XLR connector
Single-ended outputs
RCA connector & BNC connector
Output level
4Vrms (balanced)
2Vrms (single-ended)
Frequency response (-3dB point)
DC-50kHz (SACD, balanced and single-ended, digital filter dependent)
DC-20kHz (CD, balanced and single-ended, digital filter dependent)
Dynamic Range (DNR)
120dB (SACD, balanced and single-ended)
96dB (CD, balanced and single-ended)
Signal to Noise Ratio (SNR)
121dB (SACD, balanced and single-ended)
121dB (CD, balanced and single-ended)
Total Harmonic Dist Noise (THD+N)
<0.0015% (SACD, balanced and single-ended)
<0.002% (CD, balanced and single-ended)
Synchronization inputs and output (SYNC_IO board)
Clock input
1x BNC connector, 0.5Vpp to 5Vpp, 75
'
Ohm or high input impedance
Wordclock (44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz),
Masterclock (22.5792, 24.476 MHz),
DSD bitclock (2.8224 MHz),
Atomic clock (100 kHz, 10 MHz),
40% to 60% duty cycle square wave
Clock output
2x BNC connectors, 2Vpp, 75
'
Ohm output impedance
Buffered Clock input or Audio Wordclock
50% duty cycle square wave
Remote control
Remote control type
Infrared. Uses RC5 codes. Range: 10m (line of sight)
Remote control batteries
2x AAA type
(1) True multi-channel SACD operation requires additional optional output boards (digital or analog) for Ls/Rs and C/Sub channels
Design and Specifications are subject to change without notice. Weight and dimensions are approximate
Illustrations are informative only and may differ from the actual production model
Enclosure designed by Mana Ishoni
Rev 3.0
D1 User Manual
51
