4.2.1 Normal mode
Normal mode is used for SACD/CD playback control. When powered-on, the D1 SACD/CD unit starts in Normal mode. The display
looks as follows:
Normal mode display elements
(1) Disc layer selection for SACD (indicates 6ch if multi-channel layer is selected and player is equipped for multi-channel or DM if the multi-channel
layer is read but the player output is stereo only)
(2) Time display mode. Indicates TOTAL if time information is relative to the whole disc
(3) Mute indication. If the
7
symbol is present, the output is muted
(4) Repeat indication. If the symbol
:
is present, repeat mode is engaged
(5) Repeat type. If repeat is for the whole disc, the indication ALL is activated
(6) Current time. Negative time indicates remaining time (either for track or for disc)
(7) Polarity (phase) indication. If the
H
symbol is present, polarity is reversed
(8) External power supply indication. When an external power supply is connected and engaged,
<
symbol is displayed and internal power supply is
turned off
(9) Clock source indication
(10) Playing status indication
(11) Lock indication (
J
or
K
). Tells if the unit is locked to a clock source or not
(12) Track number
(13) Disc type (CD or SACD)
Displayed elements depend on the type of disc, installed optional boards and user settings. In the example above, the 7
th
track of a
multi-channel SACD is played back on a unit supporting multi-channel output. Total elapsed time is 28min 34s, phase is inverted
and the whole disc is repeated. The D1 powered through an external power supply and is locked to its internal clock but its outputs
are muted. Displayed elements for other configurations and settings or when playing back a CD are similar.
Rev 3.0
D1 User Manual
25
