If Multichannel layer is selected in pure Stereo D1
unit, the output will be a L/R downmix of the
multichannel information. For pure stereo D1
applications, it is recommended to use Stereo SACD
as SACD layer (default behavior).
DEFAULT DISC LAYER Multichannel SACD
Stereo SACD
Multi-channel capability
(Output boards
(DIGITAL_OUT or
ANALOG_OUT) for L/R,
Ls/Rs and C/Sub)
Chose if the stereo or the multichannel layer of an
SACD should be selected by default upon loading
(whenever these layer are available on a given
SACD).
REPEAT MODE
Normal
Repeat track
Repeat all
None
This setting is only valid while a disc is playing.
Returns to default (Normal) upon disc stop.
CLOCK SOURCE
Internal Clock
Synchro BNC (75 Ohm)
Synchro BNC (Hi-Z)
SYNC_IO board to
choose another clock
source than Internal
Internal clock source is available in all cases
Synchro BNC (75 Ohm) and Synchro (Hi-Z) are only
available when the SYNC_IO board is installed.
SYNC_IO offers choice of 75 Ohm or high-
impedance on its BNC clock input.
ACTIVE OUTPUT
CH-LINK L/R
AES-EBU L/R
RCA S/PDIF L/R
TOSLINK S/PDIF L/R
CH-LINK Ls/Rs
AES-EBU Ls/Rs
RCA S/PDIF Ls/Rs
TOSLINK S/PDIF Ls/Rs
CH-LINK C/Sub
AES-EBU C/Sub
RCA S/PDIF C/Sub
TOSLINK S/PDIF C/Sub
At least 1x DIGITAL_OUT Used to individually enable/disable digital outputs.
Note: AES-EBU outputs support consumer encoding.
Options for Ls/Rs channels are only displayed if a
DIGITAL_OUT board is installed for Ls/Rs channels.
Options for C/Sub channels are only displayed if a
DIGITAL_OUT board is installed for C/Sub channels.
DAC PCM FILTER
Min P. low ringing
Min P. apodising
Min P. sharp
Linear P. apodising
Linear P. sharp
At least 1x
ANALOG_OUT
Choice of different filter types for PCM audio (CD or
CD layer of an SACD).
Min P. indicates minimal phase and Linear P.
indicates linear phase.
Low ringing corresponds to a soft-knee filter and
Sharp corresponds to a steep cut-off. Apodising
filters reach full attenuation at half the sampling
frequency to minimize transition band aliasing.
Rev 3.0
D1 User Manual
33
