DAC DSD FILTER
Min P.
Linear P. low ringing
Linear P. trade-off
Linear P. sharp
At least 1x
ANALOG_OUT
Choice of different filter types for DSD audio (DSD
layer of an SACD).
Min P. indicates minimal phase and Linear P.
indicates linear phase.
Low ringing corresponds to a soft-knee filter and
Sharp corresponds to a steep cut-off. Trade-off, as
the name suggests, is an intermediary between Low
ringing and Sharp filters.
ANALOG OUTPUT
To preamp
To power amp
At least 1x
ANALOG_OUT
If D1's analog output is connected directly to a
power amp, it can be attenuated by the volume set
in the master C1 or L1 (command is sent from
C1/L1 to D1 through TCP/IP command on the
network)
Details of AUDIO SETTINGS menu Parameters
4.3.1.2
DISPLAY SETTINGS
The D1 SETUP >> DISPLAY SETTINGS menu allows configuration of the display
related Parameters of the unit. Accessible Parameters are:
- TIME INFO:
- DISPLAY MODE:
- LED ON/OFF:
- BRIGHTNESS NORMAL:
- BRIGHTNESS DIMMED:
- COLOR CD:
- COLOR SACD:
- GAMMA:
Selects time display mode
Allows to turn the display off
Selects if the LED remains on when D1 is on
Sets the normal display brightness
Sets the dimmed display brightness
Selects the display color for CD playback
Selects the display color for SACD playback
Fine tunes the AMOLED's display RGB gamma curve
The following table details the Parameters of the DISPLAY SETTINGS menu:
PARAMETER
PARAMETER VALUES
REQUIRED OPTIONS
REMARKS
TIME INFO
Track
Track remain
Disc
Disc remain
None
Remaining times are indicated with a minus sign in
front of the time value display.
DISPLAY MODE
Status
Off
None
Selects if the screen will display status information
with reduced brightness (dimmed) or be turned
completely off when the unit is idle for several
seconds
34
D1 User Manual
Rev 3.0
