4.3.1.4
FACTORY SETTINGS
The D1 SETUP >> FACTORY SETTINGS menu allows to get information about
current D1 firmware version, to update the D1 firmware and to reset the unit to
default configuration. Accessible Parameters are:
- FIRMWARE VERSION:
- UPDATE FIRMWARE:
- RESET ALL SETTINGS:
- SERIAL NUMBER:
- SHORTCUTS:
- OUTPUT ENABLED:
- NETWORK KNOWLEDGE:
Current firmware version (read only)
Allows to update the unit's firmware
Returns the unit to factory settings
Displays the serial number of the machine
Redefines all Shortcuts to factory settings
Allows to enable all digital outputs at once
Clears list of detected devices on the network
The following table details the Parameters of the FACTORY SETTINGS menu:
PARAMETER
RELATED ACTION/VALUE REQUIRED OPTIONS
REMARKS
FIRMWARE VERSION
Firmware version
None
Firmware version
indicates the version of the current
firmware. Format is
x.y.
This parameter is read only.
UPDATE FIRMWARE
Update
None
Selecting 'Update' launches the D1 firmware update
process.
RESET ALL SETTINGS
Reset
None
Selecting 'Reset' returns the D1 to its factory
settings. Factory settings are detailed in the
Specifications section.
SERIAL NUMBER
Serial number
None
Serial number
indicates the serial number of the D1.
Format is yymm01nn. This parameter is read only.
SHORTCUTS
Default mapping
None
Selecting 'Default Mapping' returns the D1's
Shortcuts to their factory settings. Factory settings
are detailed in the Specifications section.
OUTPUT ENABLE
Enable all
None
Selecting 'Enable all' will enable all D1 (digital)
outputs.
NETWORK
KNOWLEDGE
Reset
None
Clears the D1's memory of other CH Precision
devices
it has discovered through the TCP/UDP proprietary
protocol.
Details of FACTORY SETTINGS menu Parameters
Rev 3.0
D1 User Manual
37
