The following table details the Parameters of the NETWORK menu:
PARAMETER
PARAMETER VALUES
REQUIRED OPTIONS
REMARKS
STATUS
IP address
Product type
MAC address
Connection to a router
via its RJ-45 Ethernet
port
List of CH Precision devices and Android remote
controls detected by the D1 (product type, IP and
MAC addresses)
Read Only parameters
ROLE
Offline
Online
Connection to a router
via its RJ-45 Ethernet
port
When physically connected to a network, the D1 can
ignore this network (offline) or connect to it
(online)
ROOM NUMBER
1
…
7
Connection to a router
via its RJ-45 Ethernet
port
Define the room in which room the D1 is for
multiroom applications.
This prevents CH Precision units connected to the
same network but located in different
systems/rooms to interact with each others.
IP SETTINGS
Auto (DHCP)
Direct-Link
Manual
Connection to a router
via its RJ-45 Ethernet
port
Auto should be selected if the D1 is connected to a
router with DHCP server feature.
WAKE-ON-LAN
No
Only if PoE
Yes
Connection to a router
via its RJ-45 Ethernet
port
If No is selected, the D1 can't be woken up by the
app. Standby mode will consume less than 0.5W.
When Only if PoE is selected, the D1can only be
waken by the app if connected to a Power-over-
Ethernet switch. Standby mode will draw less than
0.5W from the mains plug.
If Yes is selected, the D1 can always be woken up by
the app. Standby mode will draw a couple of watts
from the mains plug.
Details of NETWORK menu Parameters
4.4 Remote control
4.4.1 Remote control operation
The D1 SACD/CD unit is delivered with an IR remote to control the unit's basic operations. The provided remote control is not
intended to be used to configure the unit.
Rev 3.0
D1 User Manual
39
