There are six main menus used for configuration of the D1:
•
AUDIO SETTINGS: Allows to adjust audio related parameters
•
DISPLAY SETTINGS: Allows to adjust display related parameters
•
SHORTCUTS: Allows to assign and modify Shortcuts for user interface customization
•
FACTORY SETTINGS: Indicates the software version and allows to update it. Also allows to return to factory settings
•
INSTALLED OPTIONS: Provides information about the installed optional slot-in boards
•
NETWORK: Provides information about the network setup and enables its configuration.
4.3.1 D1 configuration menu items
4.3.1.1
AUDIO SETTINGS
The D1 SETUP >> AUDIO SETTINGS menu allows configuration of the audio
related Parameters of the unit. Accessible Parameters are:
- MUTE:
- PHASE POLARITY:
- CURRENT DISC LAYER:
- DEFAULT DISC LAYER:
- REPEAT MODE:
- CLOCK SOURCE:
- ACTIVE OUTPUT:
- DAC PCM FILTER:
- DAC DSD FILTER:
- ANALOG OUTPUT:
Mutes or unmutes the audio output
Allows to revert the phase of the audio output
Selects the disc layer to be read for current SACD
Selects default layer used upon disc loading
Selects the repeat mode
Allows to select the clock source
Selects active outputs (DIGITAL_OUT boards only)
Digital filter selection for PCM audio (ANALOG_OUT only)
Digital filter selection for DSD audio (ANALOG_OUT only)
Selects if the D1 outputs analog signal at full level or not
The following table details the Parameters of the AUDIO SETTINGS menu:
PARAMETER
PARAMETER VALUES
REQUIRED OPTIONS
REMARKS
MUTE
Muted
Unmuted
None
None
PHASE POLARITY
In phase
Out of phase
None
None
CURRENT DISC LAYER Multichannel SACD
Stereo SACD
Stereo CD
When an SACD is stopped, the user can force the D1
to read another layer by changing the CURRENT
DISC LAYER parameter.
32
D1 User Manual
Rev 3.0
