4.3.1.5
INSTALLED OPTIONS
The D1 SETUP >> INSTALLED OPTIONS menu provides read-only information
about installed slot-in boards. Details are:
- SYNCHRO:
- SLOT 1:
- SLOT 2:
- SLOT 3:
- SLOT 4:
Synchronization option installed
Output board installed in Slot 1
Output board installed in Slot 2
Output board installed in Slot 3
Output board installed in Slot 4
Each slot indicates the type of board and the channels it handles. A '-' indicates
that the slot is currently unpopulated.
The following table details the Parameters of the INSTALLED OPTIONS menu:
PARAMETER
PARAMETER VALUES
REQUIRED OPTIONS
REMARKS
SLOT 1
SLOT 2
SLOT 3
SLOT 4
Digital Out L/R
Digital Out Ls/Rs
Digital Out C/Sub
Internal DAC L/R
Internal DAC Ls/Rs
Internal DAC C/Sub
Internal DAC Left
Internal DAC Right
-
At least 1x DIGITAL_OUT
or 1x ANALOG_OUT
Parameters report which type of board
(DIGITAL_OUT, ANALOG_OUT or none) are installed
in the different slots.
They also indicate for which channels pair (L/R,
Ls/Rs or C/Sub) the boards are configured.
'-' indicates no board is installed in the given slot.
Parameters are Read Only
SYNCHRO
Clock In/Out
-
SYNC_IO
Reports the presence of the SYNC_IO board. If
SYNC_IO is not installed, the Parameter reads '-'.
Parameter is Read Only
Details of INSTALLED OPTIONS menu Parameters
4.3.1.6
NETWORK
The D1 SETUP >> NETWORK menu allows knowledge and customization of the
network related Parameters of the unit. Accessible Parameters are:
- STATUS:
- ROLE:
- ROOM NUMBER:
- IP SETTINGS:
- WAKE-ON-LAN:
Listing of all CH products detected (product type, IP and
MAC addresses
Defines if the D1 should interact with the network
(online) or not (offline)
Group units connected to a single network by room
Low-level network configuration
Select if a unit can be powered on from the network
38
D1 User Manual
Rev 3.0
D1 SETUP >> INSTALLED OPTIONS
SLOT 1
SLOT 2
SLOT 3
SLOT 4
Digital Out L/R
DAC Ls/Rs
DAC C/Sub
-
SYNCHRO
Clock In/Out
