CG Emotron DSV15, Руководство пользователя

Страница: 28 / 32

6 Technical data
30
Standards and operating conditions
6 Technical data
6.1 Standards and operating conditions
Conformities
CE 2014/35/EU Low-Voltage Directive
2014/30/EU EMC Directive (reference: CE-typical drive system)
EAC TR TC 004/2011 Eurasian conformity: safety of low voltage equipment
TP TC 020/2011 Eurasian conformity: electromagnetic compatibility of
technical means
RoHS 2 2011/65/EU Restrictions for the use of specific hazardous materials
in electric and electronic devices
Approvals
UL UL 61800-5-1 for USA and Canada (requirements of the CSA 22.2
No. 274)
0.25 kW … 22 kW (30 kW … 45 kW in preparation)
Energy efficiency
Class IE2 EN 50598-2 Reference: Emotron setting (switching frequency 8
kHz variable)
Degree of protection
IP20 EN 60529
Type 1 NEMA 250 Protection against contact
Open type only in UL-approved systems
Insulation resistance
Overvoltage category III EN 61800-5-1 0 … 2000 m a.m.s.l.
Overvoltage category II above 2000 m a.m.s.l.
Control circuit isolation
Safe mains isolation by double/
reinforced insulation EN 61800-5-1
Protective measures against
Short circuit
Earth fault Earth fault strength depends on the operating status
Overvoltage
Motor stalling
Motor overtemperature PTC or thermal contact, I²xt monitoring
Leakage current
> 3.5 mA AC, > 10 mA DC EN 61800-5-1 Observe regulations and safety instructions!
Mains switching
3-time mains switching in 1 min Cyclic, without any restrictions
Starting current
≤ 3 x rated mains current
Mains systems
TT Voltage to earth/ground: max. 300 V
TN
IT Apply the measures described for IT systems!
IT systems are not relevant for UL-approved systems
Operation on public supply systems
Implement measures to limit the radio
interference to be expected: The machine or plant manufacturer is responsible for
compliance with the requirements for the machine/
plant!
< 1 kW: with mains choke EN 61000-3-2
> 1 kW at mains current ≤ 16 A:
without additional measures