CF MOTO 150NK, Руководство пользователя, Страница: 49 / 67

[
Drive chain adjustment and replacement
]
Adjustment
：
1. Park the motorcycle using the main stand (optional). Shift to neutral and shut off the engine (ignition key
removed).
2. Loose rear wheel axle nut adjust
⑤
adjusting to adjust the chain tension to specification 10mm~20mm.
Both chain adjusters should point to the same adjustment scale
⑥
.
Inspect the chain tension and then
tighten the rear a
x
le nut. Tighten the lock nut ④.
Replacement
：
1.
Using the needle nose pliers, remove the lock clip ③ of the drive chain. Open the link and remove
the
chain carefully.
2. Remove the engine sprocket and rear sprocket with proper tools.
3. Reverse the removal procedure for installation of engine sprocket, drive train and rear sprocket.
4. To install the lock clip, ensure the open side of the link to be opposite to the running direction
②
.
7.8 ABS braking
- 4 8 -
1. Loose the gas hold the clutch to slow down the vehicle
；
2. Change to 1st gear
；
3. Make sure the front and rear braking be used at the same time. To make sure the engine won't stop.
Use lower gear or hold the clutch
；
4. Use lighter braking force when steering and getting lower speed before steering.
wer speed and braking too much may
5
. Emergency brake, forget getting lo
6. Slow down the vehicle before into the turnbrake slightly when in the turn.