Cetrek Chartnav 343, Руководство пользователя

Страница: 81 / 88

81
To alter the parameters move the asterisk (*) to the
appropriate parameter using the and keys, then scroll
through the available settings (shown above) using the
MENU key.
UART 0 is for input on the Power I/O Port (White) and
Serial - (Green) Input. UART 1 is for Input on the External GPS
Port, GPS Serial Input + (White) and Ground 0V (Grey).
Set the parameters to those that match the navigation receiver
and return to the Input Data Display Test to confirm that the
data is correct. These settings are only used in the Input Data
Display Test and are ignored by the Chartnav in its normal
operation. It may be necessary to experiment with the input
parameters to determine exactly what format your receiver is
providing.
STANDARD INPUT PARAMETERS
Baud RateWord Length Parity Polarity
C-net NMEA Data 4800 8-bit None Normal
NMEA 0183 4800 8-bit None Normal
NMEA 0182 1200 8-bit Even Normal
Furuno CIF 4800 7-bit Even Normal
Koden 757 4800 8-bit None Inverse
Koden 717 4800 8-bit None Inverse
II Morrow 1200 7-bit None Normal
Navstar 2000D 110 8-bit None Normal
(The Diagnostic Tests are unable to display the Navstar 2000D input
parameters).
17.4 C-Card Test
Allows you to check the CF95 Chart Cards when you select
this test a new menu will appear.
To do the test move the asterisk (*) to the C-Card Box with the
or keys and press the MENU key.
All manuals and user guides at all-guides.com
all-guides.com