Cetrek Chartnav 343, Руководство пользователя

Страница: 68 / 88

CHARTNAV 343
68
A local fix position correction may be required if a position
calculated by WGS84 is plotted on a chart using a local model.
These settings allow you to turn this feature OFF or ON to
match the datum that you are using.
XTE Direction Display
In Normal Operation you can choose to display the Cross
Track Error (XTE) while in Navigate Mode, viewing the
PLOTTER Page . This display is in the form of a Bar Graph
across the top of the display. The total error, in 100ths of a
nautical mile, is displayed in the centre window. Chevrons
either side of the window indicate the direction the vessel
needs to move to correct the error. This facility is not available
on a Fullscreen Display.
If the XTE Direction Display is turned ON the display
will only appear once a Target has been entered and
the bearing calculated.
GPS Display and GPS Status Display
As noted previously in the manual the last two information
pages in the Page Cycle, the NAVIGATION DATA and GPS
STATUS Pages, may be switched OFF to remove them from the
cycle, thereby leaving a two page cycle. In this menu the GPS
Display refers to the NAVIGATION DATA Page.
Plotter Screen
This option determines the way the PLOTTER Page will be
displayed when the unit is turned on. If NORMAL is chosen
the PLOTTER Page will be shown complete with the Data
Display Window. Alternatively selecting FULL will give a
Fullscreen Chart Display.
Language Selection
This sets the language that will be used throughout the
displays. Once this option is highlighted the language options
available will be listed at the base of the screen, simply use the
SELECT key to cycle through the options until the desired
language is highlighted.
All manuals and user guides at all-guides.com