3300IP VoIP Phone | User Manual
www.CetisGroup.com
19
Speed dial and Touchlite Message keys are programmed under Advance -> Memory Key
MWI Number
is the field for programming the Red
Message Waiting Indicator
Touchlite.
In this example, it is programmed to dial number (7001) on the IP/PBX for retrieving voicemail messages.
Manual Programming - Programming the 3300IP via the LCD and Submerged Keys
There are 2 submerged keys (above the 10 speed dial keys/underneath the faceplate). The left (store) key is used to
store speed dials as well as enter the internal menu to check status and program the phone.
1.
Speed Dial
: To program a speed dial, Press the store key
…
press the digits you want stored
…
press a speed dial
key.
2.
Internal Menu
: To enter the
phone’s internal menu, hold down the
left (store) key for three seconds. At
that time, you will be prompted to
enter the password (default password
= 123) then press the other key (right
key = flash) to enter the LCD
navigation menu.
Vol up key navigates up
Vol Down key navigates down
Right/Flash key is Enter/Select
Left/Store key is Escape (back out
of that menu option)
To determine the IP address assigned
to the phone, Navigate to Config ->
Network -> WAN -> Status using the
keys and process outlined above.
Other useful documents are
Reference-IP DECT Handset Registration and De-Registration
&
Reference- 1.8.0
Quick Keys
Reset to Factory Default
To reset the phone to the factory default settings, press “#” during the startup procedure (At power up you can see a
black progress bar). The phone will enter into “post” mode, then input
* # 1 6 8
Then you will see “clearing conf”
on the screen, next you see “conf reset”. Now you have reset to the default settings. Lastly, cycle power (remove and
replace WAN power cable) to restart the phone with factory default settings.
