3300IP VoIP Phone | User Manual
www.CetisGroup.com
6
3.4 VoIP
3.4.1 SIP Config
Setting page of public SIP server:
Register Server Addr:
Register address of public SIP server
Register Server Port:
Register port of public SIP server
，
default port is 5060
Register Username:
Username of your SIP account (Always the same as
the phone number)
Register Password:
Password of your SIP account.
Proxy Server Addr:
IP address of proxy SIP server (SIP
provider always use the same IP for register server and
proxy server, in this case you don’t need to configure
the proxy server information.)
Proxy Server Port:
Signal port of SIP proxy
Proxy Username:
proxy server username
Proxy Password:
proxy server password
Domain Realm:
SIP domain, enter the sip domain if any,
otherwise 3300IP will use the proxy server address as
sip domain.
Local SIP port:
Local SIP register port, default 5060
Phone Number:
Phone number of your SIP account
Enable Register:
Enable/Disable SIP register.3300IP
won’t send register info to SIP server if disable register.
Enable Message Waiting:
The configuration allows/
forbids Message Waiting.
Advanced SIP Setting
Register Expire Time:
register expire time, default is 60
seconds. 3300IP will auto configure this expire time to the
server recommended setting if it is different from the SIP
server.
Call Forward:
Please refer to Value_add_service for detail.
No answer: If no answer, it will forward to appointed
phone.
Always:
The caller always forward to the appointed
phone.
Forward Photo Number:
call the forwarded phone number.
Detect Interval Time:
Co-work with the Auto Detect Server,
if Auto Detect Server is enable, 3300IP will periodically
detect if the SIP server is available according this setting.
User Agent:
Encrypt Key:
The particular service system decrypts of the
key, matching with the server Type usage, the key
provide by the particular service system supplier, default
is empty
Server Type:
The particular service system supplier carries
out the sign and speeches to encrypt, default is common
DTMF Mode:
DTM signal sending mode: support
RFC2833, DTMF_RELAY (inband audio) and SIP info
RFC Protocol Edition:
Current 3300IP SIP version. Set to
RFC 2543 if the gate need to communicate to devices
(such as CISCO5300) using the SIP 1.0. Default is RFC
3261.
3.4.2 Iax2 Config
Setting page of public IAX server:
IAX Server Addr:
Register address of public IAX server
IAX Server Port:
Register port of public IAX
server
，
default port is 4569
Account Name:
Username of your SIP account (Always
the same as the phone number)
Account Password:
Password of your IAX account.
