3300IP VoIP Phone | User Manual
www.CetisGroup.com
9
Configuration:
In_access enable
enable in_access rule
Out_access enable
enable out_access rule
Input/Output:
current adding is input rule or output rule.
Deny/Permit:
current adding is deny rule or permit rule.
Protocol Type:
protocol using in this rule: TCP/IP/
ICMP/UDP.
Port Range:
port range if this rule
Src Addr:
source address. It is can be single IP address
or network address.
Dest Addr:
destination address. It is can be IP address
or network address.
Src Mask:
source address mask. Indicate the source is
dedicate IP if set to 255.255.255.255. Otherwise is
network ID
Des Mask:
Destination address mask. Indicate the
source is dedicate IP if set to 255.255.255.255.
Otherwise is network ID
3.5.6 VLAN Configuration
3300IP phone implement QoS based on 802.1p, The
QoS is used to mark the network communication
priority in the data link/MAC sub-layer. 3300IP will sort
the packets using the QoS and sends it to the
destination.
VLAN Enable:
If enable the VLAN service, the second
layer will realize separate voice, signal and data
transmission. To realize separate voice and data
transmission by dispose for IP precedence of ToS area
of voice transmission. To reach upper layer switch or
router have priority to transfer voice transmission. (The
prerequisite is the upper layer switch or router has to
identify ToS area.)
VLAN ID:
Dispose VLAN ID is adding a Tag header after
realize enable the VLAN function. The realized voice
packets transfer at the same VLAN. The prerequisite is
it must the same as VLAN of upper switch. The value
range are 1~4094.
DiffServ Enable
: If enable the VLAN service, it indicates
use DSCP mode to realize three layers QoS. This
moment, the DSCP of SIP signals which between
3300IP Phone and MGC. It will use Class Selector 5
(The value is 0xA0). And the DSCP of mediums
information (In RTP packets) would be used the values
of DiffServ Value field.
DiffServ Value:
The value range
：
0x28,0x30,0x38,0x48,0x50,0x58,0x68,0x70,0x78,0x88,
0x90,0x98,0xb8.default is 0xb8 ,oxb8 stands for best
fast transmission; 28-38 is guarantee for the
transmission priority for the 1st rank , 48-58 is
guarantee for the transmission priority for the 2nd rank,
68-78 is guarantee for the transmission priority for the
3rd rank, 88-98 is guarantee for the transmission
priority for the 4th rank.
802
．
IP Priority: The priority of 802.ip
3.5.7 Digital Map
Digit map is a set of rules to determine when the user
has finished dialing.
3300IP support below digital map:
Digital Map is based on some rules to judge when user
end their dialing and send the number to the server.
3300IP support following digital map:
-
End With “#”: Use # as the end of dialing.
-
Fixed Length: When the length of the dialing
match, the call will be sent.
-
Timeout: Specify the timeout of the last dial digit.
The call will be sent after timeout
-
Prefix: User define digital map
-
[ ]
represents the range of digit, can be a range
such as [1-4], or use comma such as [1,3,5], or use a
list such as [234]
x
represents any one digit between 0~9
Tn
represents the last digit timeout. n represents
