3300IP VoIP Phone | User Manual
www.CetisGroup.com
16
IAX Server Addr:
Register address of public IAX server
IAX Server Port:
Register port of public IAX server,
default port is 4569
Account Name:
Username of your SIP account (Always
the same as the phone number)
Account Password:
Password of your IAX account.
Local port:
Signal port of local, default port is 4569
Phone Number:
Phone number of your IAX account
-
choose Enable Register
；
-
if you use IAX account to make a call, please
choose IAX
（
Default Protocol
）
, if you fail to
choose it, then you can use SIP account to make
a call again.
-
if you use G..729 to arrange it ,please choose
Enable G..729
You can dial VoIP phone when the WAN interface and
IAX protocol.
Note:
please choose Save Config in the Config Manage
after setting the information, or the existing setting
information will be failed after rebooting..
4.3 How to use the dial rule?
3300IP provide flexible dial rule, with different dial-rule
configure, user can easily implement the following
function:
-
Replace, delete or add prefix of the dial number.
-
Make direct IP to IP call
-
Place the call to different servers according the
prefix.
-
You can click “Add” to add a new dial rule. Below is the
detail setting of the dial-rule:
Phone Number:
The Number suit for this dial rule, can
be set as full match or prefix match. Full match means
that if the number user dialed is completely the same as
this number, the call will use this dial-rule. Prefix match
means that if prefix of the number that the user dials is
the same as the prefix, the call will use this dial-rule, to
distinguish from the full match case, you need to add
“T” after the prefix number in the phone number setting.
Call Mode:
support SIP.
Destination (optional):
call destination, can be IP or
domain. Default is 0.0.0.0, in this case the call will be
routed to the Public SIP server. If you set the
destination to 255.255.255.255, then the call will be
routed to the private SIP server. Also you can key other
address here to make direct IP calls
Port (optional):
Configure the port of the destination,
default is 5060 in SIP
Alias (optional):
Set up the Alias. We support four Alias
as below. Alias need to co-work with the Del Length:
add:xxx,
add prefix to the phone number, can
set to reduce the dial length.
all: xxx,
replace the phone number with the xxx, can
use as speed dial function.
del, delete the first N numbers. N is set in the
Del Length
rep:xxx
，
replace the first N numbers. N is set
call 86633-8215555, then you can set the
phone number in the dial rule as 0633T, and
set the Alias as rep:86633, and set the Del
Length to 4. Then all calls begin with 0633 will
be changed to 86633 xxxxxxxx.
Suffix (optional):
Configure suffix, show no suffix if not
set Instance
2T rule:
If the call starts with 2, the first 2 will be deleted,
and the rest number will be sent to private SIP server.
3T rule:
If the call starts with 3, the first 3 will be deleted,
and the rest number with be sent to public SIP server.
123 rule:
Dial 123 and will send 06332221015 to your
server. Used as speed dial function.
0T rule:
If the calls is begin with 0, the first 0 will be
replaced by 86. Means that if you dial 06332221015
and AG-188 will send 866332221015 to your server.
11 rule:
when you dial 11, the call with send to
192.168.0.11, suit for LAN application without set up a
sip server.
