3300IP VoIP Phone | User Manual
www.CetisGroup.com
7
Local port:
Signal port of local, default port is 4569
Phone Number:
Phone number of your IAX account
Voice mail number:
If the IAX support voice mail, but
your username of the voice mail is letters which you
can not input with the ATA, then you use the number to
stand for your username
Voice mail text:
if IAX support voice mail, config the
domain name of your mail box here.
Echo test number:
If the platform support echo test, and
the number is test form, the config the test number to
replace the text format The echo test is to test the
woring status of terminals and platform
Echo test text:
echo test number in text format
Refresh time:
IAX refresh time
Enable Register:
enable or disable register
Enable G.729:
Using G.729 speech coding mandatory
consultations
IAX2 (Default Protocol):
Set IAX 2 as the default
protocol, if not the system will choose SIP as default
3.5 Advance
3.5.1 DHCP Server
DHCP server manage page.
User may trace and modify DHCP server information in
this page.
DHCP Lease Table
：
display the IP
－
MAC corresponding
table that the server distributed.
Lease Table Name:
Lease table name.
Start IP:
Start IP of lease table.
End IP:
End IP of lease table. Network device
connecting to the 3300IP LAN port can dynamic obtain
the IP in the range between start IP and end IP.
Lease Time:
DHCP server lease time.
Netmask:
Netmask of lease table.
Gateway:
Default gateway of lease table
DNS:
default DNS server of lease table.
DNS Relay:
enable DNS relay function.
User may use below setting to add a new lease table.
Notice:
This setting won’t take effect unless you save
the config and reboot the device
3.5.2 NAT
Advance NAT setting. Maximum 10 items for TCP and
UDP port mapping.
DHCP Lease Table
：
Show IP—MAC corresponding table
assigned by DHCP server.
IPSec ALG:
Enable/Disable IPSec ALG;
FTP ALG:
Enable/Disable FTP ALG;
PPTP ALG:
Enable/Disable PPTP ALG;
Transfer Type:
Transfer type using port mapping.
Inside IP:
LAN device IP for port mapping.
Inside Port:
LAN device port for port mapping.
Outside Port:
WAN port for port mapping.
Click
Add
to add new port mapping item and
Delete
to
delete current port mapping item.
