3300IP VoIP Phone | User Manual
www.CetisGroup.com
10
the time from 0~9 second, it is necessary. Tn must be
the last two digits in the entry. If Tn is not included in
the entry, we use T0 as default, it means system will
send the number immediately if the number matches
the entry.
Example:
8[2-8]xxxxx
All number from 8200000 to 8899999 will
be sent immediately.
955xx5
digits numbers begin with 9 will be sent
immediately.
10060
Number 10060 will be sent will be immediately
22xxxxx T1
7 digits numbers begin with 22 will be sent
after one second
39[3,9]xxxx,
7 digits numbers begin with 393 or 399 will
be sent immediately.
3.5.8 Call Service Settings
User configure the value add service such as hotline,
call forward, call transfer, call waiting, 3-way conference
call, auto-answer, etc in this page
Hotline:
configure hotline number. 3300IP immediately
dials this number after hook-off if it is set.
Auto Answer:
Enable/disable auto answer function.
No Disturb:
DND, do not disturb, enable this option to
refuse any calls.
Ban Outgoing:
Enable this to ban outgoing calls.
Enable Call Transfer:
Please refer to Value_add_service
for detail.
Enable Call Waiting:
Enable/disable Call Waiting
Enable Three Way Call: Please refer to
Value_add_service for detail.
Accept Any Call:
If this option is disabled, 3300IP refuse
the incoming call when the called number is different
from 3300IP’s phone number.
No Answer Time:
no answer call forward time setting.
Black List:
incoming call in these phone numbers will be
refused.
Limit List:
outgoing calls with these phone numbers will
be refused
3.5.9 Memory Key Programming
This page layout shows the number setting of Speed-
dial keys. There are several special functions that can
be programmed into Memory Keys, such as
Transfer,
Transfer-Silent, and Call-Park/Retrieve
.
3.5.9.1 Memory Key Special Programming –
Transfer, Transfer Silent and 1-second Pause
Transfer occurs when there is an active/live call in
progress. If no call is active, the ‘T’ is ignored, and the
memory key will just call the programmed number
(1107). In the settings below,
Memory 1
(T1107) will
transfer to extension 1107 when pressed. The user will
hear the DTMF tones as they are transferred to 1107.
