Cerlic MultiTracker, Руководство пользователя

Страница: 6 / 43

6
Multi
Tracker
3. Turning On the Hand Controller
It is important that any sensor that is attached to the hand controller is in the air when
the hand controller is powered up. Sensors should not be in the liquid since this will
effect the pressure sensor!
To start measuring with the instrument press the
key (on/off).
The measurement starts automatically with any sensor attached to the hand controller.
The measured value is displayed on-line in text mode on the display. Some attached
sensors support a graphical image of the measured value. If the instrument has been
inactive for 8 minutes (possible to modify under “Preferences” – “Auto Off”) it will
automatically switch off. To manually switch off the hand controller, then press
key
(on/off).
4. Handling and Interface
The following icons show the keypad push buttons and describe their functions.
Opens the main menu or confirms (enters) a choice in the menus.
Closes a menu choice without changing, or exit’s one-step backwards in
the menu tree (escape function).
Navigates up one step in the menu tree or increases the value of a
chosen number in a menu.
Navigates down one step in the menu tree or decreases the value of a
chosen number in a menu.
The profile button alternates between measuring values in text or
sludge profile presentation. This function is sensor dependant.
Restart or Store of a measurement. At restart, a new measuring will be
initiated and replaces the existing value. The measured values will be
stored in the displayed log file or field at the bottom of the screen.
Turns on the backlight for display for two minutes but can be adjusted
under “Preferences” – “Light Time”.
On/Off switch. Press the button in order to turn on or off the Hand
Controller.
Description of the Display in Text Mode
At start up, the display is shown in fig 6 and description in fig 7. Measured concentration
is displayed on the left and alarm values for Threshold 1 (6) and Threshold 2 (7).
General information like time, date and temperature will always be displayed in the top