Cerlic MultiTracker, Руководство пользователя

Страница: 15 / 43

15
Multi
Tracker
8. Trouble shooting
Check that the batteries are in good condition. The MultiTracker has built in logic to
increase the battery life. If the battery voltage goes below a certain level, then the
software will block the following functions; display back light, acoustic and vibration
signals. Battery life is displayed on the top of the screen
.
If the sensor should deviate from expected values, then a new calibration should be
performed. Please see section Calibration for instructions under each sensor.
In case of any malfunction that is not possible to correct with a new calibration, please
contact Cerlic or a local Cerlic representative. In the event of returning the MultiTracker
to Cerlic for checkup or repair, please make sure to use the form for Return of Material
(RMA) prior to shipping . The RMA document can be downloaded from the Cerlic web
page www.cerlic.com . The WEB page also has the correct shipping address.
9. Spare Parts
The MultiTracker is supplied with four AA batteries. The batteries are the only parts
that are subject to be replaced by the user. It is suggested to keep an extra set of
batteries available.
Spare part list:
Part no Description
21450731 Battery 3V 200mAh
21450989 Battery AA (4 required)
20250978 Case for MultiTracker
20250979 Big case for more than 2 sensors
20201021
Battery Holder Case for 4 AA batteries
20201020 Handle Tracker
21650997 O-ring for cable hook 25,0x4,0 EPDM 70 or BunaN
11201058 Cable Hook for MultiTracker
21101037 Lock key cable hook
10206149 Horisontal attachement for Oxyduo cable
10. Contact information
Actual shipping address is always available at the Cerlic web page www.cerlic.com.
Cerlic Controls AB
Mälarvägen 3, SE 141 71 SEGELTORP, Sweden
Phone:+46 850 169 400
Mail address: P.O. Box 5084, SE-141 05 KUNGENS KURVA, Sweden
web: www.cerlic.com