Cerlic MultiTracker, Руководство пользователя

Страница: 14 / 43

14
Multi
Tracker
7. Maintenance
The instrument is designed to reduce the manual maintenance to a minimum. All metal
parts are stainless steel (SS 2343/SS316). The enclosure is IP65/NEMA 4. The sensor
cable is a specially manufactured PUR™ with a strong shield and extra heavy wires to
withstand mechanical wear for a long life. The sensor and enclosure cable fittings are
high quality MatchClamp™ to ensure a water proof connection even should the outer
shield be damaged.
Inspection of the sensor
The sensor should be cleaned, if any solids or fouling of the measuring windows occurs.
When cleaning the sensor, it is preferred to use the Cerlic Sensor Cleaning (CSC) liquid.
It is also possible to use a soft cloth and water. Pay attention not to scratch the quartz
measuring windows or damage the built in pressure sensor.
Changing of Batteries
Cerlic Blanket Tracker is supplied with four AA batteries, placed inside the Controller handle.
To change the batteries, follow the steps below;
1. Open the back part of the handle on the Controller . This part is a
combined battery lid and cable hook . This is done by removing the two
countersunk screws into the back of the enclosure, see fig 17. You do not
have to remove the screw holding the cable hook .
2. Remove the battery lid and replace the batteries. Make sure to follow the
label showing the battery polarity (+/-).
3. Remount the battery lid.
4. Mount the back of the handle containing the battery lid by tightening the
two countersunk screws. It is important to make sure the lid is well closed
with no visible gaps or cables between the housing and lid.
fig 17